Die preparation

   

Die preparation is a step of semiconductor device fabrication during which a wafer is prepared for IC packaging and IC testing. The process of die preparation typically consists of 2 steps: wafer mounting and die cutting.

The picture below shows a wafer after die prepration. A large number of dies were already removed.

Wafer glued on blue tape and cut into pieces

Retrieved from "http://www.mywiseowl.com/articles/Die_preparation"

This page has been accessed 63 times. This page was last modified 04:03, 8 Oct 2004. All text is available under the terms of the GNU Free Documentation License (see Copyrights for details).