Time-division multiplexing

   

Time-division multiplexing (TDM): Digital multiplexing in which two or more apparently simultaneous channels are derived from a given frequency spectrum, i.e., bit stream, by interleaving pulses representing bits from different channels.

In some TDM systems, successive pulses represent bits from successive channels, e.g., voice channels in a T1 system. In other systems different channels take turns using the channels for a group of successive pulse-times (a so-called "time slot").

What distinguishes coarse time-division multiplexing from packet switching is that the time-slots are pre-allocated to the channels, rather than arbitrated on a per-time slot basis.

Uses of time-division multiplexing:

  • The PDH and SDH network transmission standards
  • The GSM telephone system

This article was originally based on a Federal Standard 1037C entry is support of MIL-STD-188.

Related Articles


nl:Time-division multiplexing

Retrieved from "http://www.mywiseowl.com/articles/Time-division_multiplexing"

This page has been accessed 1815 times. This page was last modified 12:59, 21 Aug 2004. All text is available under the terms of the GNU Free Documentation License (see Copyrights for details).